跳至主要内容

What Is the Difference: Twinax vs Twisted Pair

With the passage of time and the development of information era by leaps and bounds, the demand for more bandwidth and data transmission to satisfy the ever-increasing number of operating systems and applications is becoming a cumulatively common trend. As the media types of transmitting signals, the popularization of SFP cable and Ethernet cable/twisted pair cable have been the tendency towards data center interconnection applications and can be ascribed to the domination of Cat5e copper cabling and 1000BASE-T over the years. So in this article, we will concentrate on the brief introduction to the cables: twinax vs twisted pair and their corresponding application considerations.

Twinax vs Twisted Pair: What Is SFP Twinax Cable?

Twinax vs twisted pair: how to understand the concept? SFP cable, sometimes called as 10G SFP+ cable, SFP+ DAC twinax cable, is a kind of high speed cable with Small Form Factor Pluggable Plus on either end. SFP twinax cable which displaces two optical modules and an optical fiber with a twinaxial copper cable assembly offers the higher density, lower cost, and lower power 10 Gigabit Ethernet solution than other cable types such as 10GBASE-CX4 and CAT6/CAT6A 10GBASE-T.
SFP Twinax Cable

Twinax vs Twisted Pair: What Is Ethernet cable?

Twinax vs twisted pair: don’t get confused with Twinax cable. An Ethernet cable, also known as twisted pair cable, is one of the most fashionable forms of network cable used in wired networks. Ethernet cable connects devices together within a local area network, such as PCs, routers, switches and normally supports one or more industry standards including Category 5 (CAT5), Category 5e (CAT5e), and Category 6 (CAT6). It can be classified into STP (shielded twisted pair) and UTP (unshielded twisted pair). Ethernet cable is applied in many situations due to its advantages of fast speed, high reliability and security.
Ethernet cable

Twinax vs Twisted Pair: Application Considerations

When you are faced with the decision of choosing between twinax vs twisted pair, the following factors have to be well considered.
Twinax vs Twisted Pair
Speed & Distance: twisted pair is normally used for 10MB, 100MB and 1GB network connections, while twinax cable goes for 10 Gigabit Ethernet Network. And twisted pair also supports much longer distance than SFP+ Direct Attach Copper cable with short range connection which measures as small as 5 m to 10 m.
Power Consumption: twinax cable uses a different signal propagation method that makes it consume much less power (something around 1-1.5W per port) comparing to UTP (4-6 W per port). So once you have a lot of ports, this power consumption can be significant factor in design. Twinax is an ideal 10GbE solution for server to Top of Rack switch connection for integrated storage and data network since the performance of low power and more reliability.
Cost: SFP twinax cable is a lower cost alternative to traditional fiber and twisted pair copper cabling in data center applications when you include switch, NIC and cable. SFP+ DAC provides better cable management for high-density deployments and enhanced electrical characteristics for the most reliable signal transmission during the process of twinax vs twisted pair.

Conclusion

From this article, you could have a good idea of twinax vs twisted pair. As you can see, there are always two sides to everything. However, you can still make your decisions according to the actual demand from the perspective of transmission distance, power consumption and budget. Fiberstore can provide high-quality fiber optic cable with different types and SFP twinax cable and twisted pair cable as well.
标签：

评论

发表评论

此博客中的热门博文

How to Connect Ethernet Switch, Router and Modem

In the computer networking world, the three most ubiquitous pieces of equipment are Ethernet switch, router and modem. These are applied everywhere from data center to network connections in your own home. However, despite the importance of these three pieces of equipment, some people are oblivious or confused to their internal functions and connection mode. So in this article, we will attempt to explain the difference between each piece of equipment and introduce the common way to connect Ethernet switch, router and modem. What Is the Difference Between Ethernet Switch, Router and Modem From a physical perspective, a modem, router and Ethernet switch look very similar. Nevertheless, there are key differences between them internally and functionally with relevant purposes on a network. Switch: Bridge Your Devices in a Network An Ethernet switch is commonly referred to as a multi-port network bridge that processes and routes data on a data link layer (layer 2) and sometimes...
发表评论
阅读全文

24 Port Switch SFP Port vs RJ45 Port: How to Choose?

Gigabit switch that offers greater speed and compatibility continues to gain in popularity in the realm of networking world. In the present market, Gigabit switch generally has two kinds of ports: SFP port vs RJ45 port. Different ports are endowed with relevant sizes and specifications which prevent the incorrect type of connector from being plugged into them. So what are the differences between SFP port and RJ45 port of the Gigabit switch? And how to choose the proper one from them? In this article we will take 24 port switch as an example to explore the distinctions and provide some considerations when choosing SFP port vs RJ45 port. Comparisons Between 24 Port Switch SFP Port vs RJ45 Port 24 Port Switch with SFP Port Built-in SFP ports on 24 port switch enable optical or copper links by inserting the corresponding SFP module: fiber SFP or copper SFP. When SFP port is inserted in 1G copper SFP module, the Ethernet copper cables (Cat5e, Cat6 and Cat7) must be used for data t...
发表评论
阅读全文

48 Port PoE Switch: Managed vs Unmanaged?

It is generally known that Power over Ethernet (PoE) technology is developed to satisfy the needs of connectivity to network devices like IP cameras, VoIP phones and Wireless Access Points (WAP). As a consequence, PoE switch is required to be capable of supporting PoE devices. There are 8 port, 24 port and 48 port PoE switches in the market. And for each type, managed PoE switch and unmanaged PoE switch are available. 8 port and 24 port PoE switches have been explained in previous posts. So today’s topic is about 48 port PoE switch managed vs unmanaged. 48 Port PoE Switch: Why Choosing Managed Over Unmanaged? 48 port managed PoE switch can expand the long-range flexibility of your network and adapt to changing environments. With organization grows, your business needs will continue to increase. So it is wise to deploy 48 port PoE switch which can respond to your dynamic business demands. 48 port PoE switch managed can be configured and it can prioritize LAN traffic to make the ...
发表评论
阅读全文